TS4’s Audio Resolutions
TS4 supports the following audio sample rates Playback sample rate2CH, 16 and 24-bits, 8/11/16/22.05/32/44.1/48/88.2/96K Hz Recording sample rate2CH, 16-bits, 8/11/16/22.05/32/44.1/48K Hz
Uninstall the SuperDrive Driver from macOS
To uninstall the macOS drivers that are to support Apple SuperDrive and Apple Keyboard from CalDigit Docks including TS4, TS3 Plus, TS3, TS3 Lite, TS2, TS1, USB-C Dock, USB-C Pro Dock, USB-C HDMI Dock, and SOHO Dock, please follow the steps below: Download the latest Uninstaller here. (Current version 1.1) Unzip the download file. Launch […]
Adding a High Refresh Rate Monitor Up to 4K/144Hz
Notes: Some 4K/144Hz monitors do not have DSC (Display Stream Compression) feature turned on by default. You will need to enable DSC support from monitor’s OSD menu manually.
TS4 Dual Monitor Guide
Does SOHO Dock Support Offline Charging?
No. SOHO Dock does NOT support offline charging to downstream USB devices while there is no host connection. You must connect both host computer and Type-C charger to SOHO Dock in order to charge your USB devices.
TS4’s Power Delivery Profiles
TS4 has the following ports that can provide power to the host or devices: Thunderbolt 4/USB4 Host Port: Up to 98W (5V, 9V, 15V/3A, 20V/4.9A)Each Downstream Thunderbolt 4/USB4 Port: 15W (5V/3A)Front 20W USB-C Port: 20W (5V/3A, 9V/2.22A)Remaining USB-C Ports: 7.5W (5V/1.5A)USB-A Ports: 7.5W (5V/1.5A)
Does TS4 support Sidecar?
Yes, you can connect your iPad to TS4’s USB-C or Thunderbolt port and use it as an external display for your Mac. You may need to reboot your Mac and iPad if there is a timeout error. For more information about Apple Sidecar, please visit https://support.apple.com/en-us/HT210380
Does the TS4 work on a legacy Thunderbolt 1 or Thunderbolt 2 Mac computer?
No. TS4 does not work with the legacy Thunderbolt 1 or Thunderbolt 2 Mac. Apple’s Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter (MMEL2AM) does not support Thunderbolt 4 devices such as CalDigit TS4 and Element Hub.
Use IP over Thunderbolt to connect two computers together (Thunderbolt Networking)
All CalDigit Thunderbolt Docks that have more than one Thunderbolt port can support Thunderbolt networking. That means you can use IP over Thunderbolt to connect two computers together. However, Thunderbolt networking can only support 2x computers. Device such as Element hub has 4x Thunderbolt ports, but you could only use the [Computer] port to connect […]
Using RJ45 Network Splitter with CalDigit Docks and Adapters
When using RJ45 Ethernet Network Splitter, such as the following, in your home or office network in between your CalDigit dock and other network devices, you will need to manually configure your CalDigit’s Ethernet port to 100MB/s (100BaseTX) as such network splitter only supports up to 100MB/s due to wire limitations. The default network configuration […]