Troubleshoot various topics related to your product.
Your most common and frequently asked questions are collected here.
The Tuff is pre-formatted for MacOS and ready to use.
You will need to re-format the Tuff for Windows.
Follow the steps below to re-format your Tuff.
Re-formatting the Tuff will erase all data on the hard drive.
Back-up your files before re-formatting.
Only proceed if you have backed-up.
1. Connect the Tuff to your Windows computer with the appropriate cable.
2. Open Disk Management (Control Panel - Administrative Tools - Computer Management - Disk Management).
3. Find the Tuff that you want to format in the list of drives.
Right click on the “Disk Number” and select “Properties”.
You will see the "CalDigit Tuff Device”.
4. In Disk Management, right click on the partition that was previously formatted for Mac and select “Delete Volume…”.
5. On the pop-up window click “YES” to delete the Mac partition.
6. When the disk comes online, right click on the “Unallocated” area and select “New Simple Volume”.
7. The “New Simple Volume Wizard” pop-up window will appear.
Follow the simple on-screen instructions to finish formatting your Tuff.
8. The Tuff will mount on your Windows computer.
Windows may automatically shut down the power to USB devices where it has no activities for a few minutes. This would cause all the USB storage devices connecting to the CalDigit Dock powered down themselves. Although it can save power, It may take a longer time for the drive to spin up if you need to access it afterward.
1 x USB 3.1 Type-C Port - 10Gb/s
Power Supply Adapter
Dimension and Weight
Height: 5.31 inches (135.0 mm)
Width: 3.52 inches (89.5 mm)
Depth: 0.83 inches (21.0 mm)
Weight: 0.60 lbs (0.27 kg)
Windows 7 or later
Mac OS X 10.8.4 or later
Temperature: 32°F ~ 158°F(0°C ~ 70°C)
In the Box
1 x Tuff
1 x USB-C Cable
1 x USB-C to A Cable
The serial number for this product is located behind the jacket on the back end of the product.
We encourage all CalDigit users to upgrade their Macs to macOS 13 Ventura for the best possible experience. This new
Mac OSX may create an extra 200 MB EFI partitions at the start of a drive hence you may see this EFI partition in Windows. The Windows Disk Management tool can’t delete these EFI partitions, and you’ll see the “Delete Volume” option grayed out. This article describes how you can clean these partitions in DOS command mode and re-format your CalDigit drive.
This tutorial is to guide you on how to retrieve your System Configuration including software and hardware profiles, detailed kernel logs as well as the diagnosis information from your Mac OSX environment.
CalDigit Support is ready to assist you.
For an optimal experience please have your product name, serial number, and operating system on hand prior to contacting support
Have a quick question?
Stop by and give us a tweet @CalDigitSupport